Module 1 | Network Fundamentals |
Unit 1 | Welcome to the Course |
Unit 2 | Configure, Verify and Troubleshoot IPv4 Addresses |
Unit 3 | Configure, Verify, and Troubleshoot IPv6 Addressing |
Unit 4 | IPv6 Address Autoconfiguration |
Unit 5 | ARP and Proxy ARP |
Unit 6 | Verifying Cisco HDLC Encapsulation |
Unit 7 | Configuring back-to-back Serial Connections |
Unit 8 | Configuring PPP Encapsulation |
Unit 9 | PPP Authentication using PAP |
Unit 10 | PPP Authentication using CHAP – Method 1 |
Unit 11 | PPP Authentication using CHAP – Method 2 |
Unit 12 | Configuring eBGP |
Unit 13 | Configure, Verify, and Troubleshoot GRE Tunnel Connectivity |
Unit 14 | PoE Basics |
Unit 15 | IP Parameters - Windows |
Unit 16 | IP Parameters - Linux |
Unit 17 | IP Parameters - MAC OS |
Module 2 | Network Access |
Unit 1 | Configuring Standard VLANs on Catalyst Switches |
Unit 2 | Configuring VTP Clients and Servers on Catalyst Switches |
Unit 3 | Configuring VTP Transparent Mode |
Unit 4 | Configuring Extended VLANs on Catalyst Switches |
Unit 5 | Changing the Native VLAN and Shutting Unused Ports |
Unit 6 | Restricting VLANs on Trunks and Changing the VTP version |
Unit 7 | Verifying Spanning-Tree Port States on Catalyst Switches |
Unit 8 | Spanning-Tree Protocol Root Bridges Manually |
Unit 9 | Spanning-Tree Protocol Root Bridges Using the IOS Macro |
Unit 10 | Assigning Multiple Instances to a VLAN Simultaneously |
Unit 11 | Configuring Spanning-Tree Protocol for Access Ports (Portfast) |
Unit 12 | Enabling Rapid Per-VLAN Spanning Tree |
Unit 13 | Configure, Verify, and Troubleshoot (Layer 2/Layer 3) EtherChannel (Static/PAgP/LACP) |
Unit 14 | Setting Switch Ports to Dynamic |
Unit 15 | Configuring a Default Gateway for Routers and Switches |
Unit 16 | Cisco Discovery Protocol |
Unit 17 | LLDP |
Unit 18 | Err-disable Recovery |
Unit 19 | Configuring and Allowing Inter-VLAN Routing - Router Sub-Interfaces |
Unit 20 | Configuring and Allowing inter-VLAN Routing - SVI |
Unit 21 | Installing a Wireless Access Point |
Unit 22 | Installing a Wireless Lan Controller |
Module 3 | IP Connectivity |
Unit 1 | Configuring Static Routing via Interfaces |
Unit 2 | Configuring Static Routing via IP addresses |
Unit 3 | Configuring and Naming Static Routes |
Unit 4 | Configuring Default Static Routes |
Unit 5 | IPv6 Static Routing |
Unit 6 | IPv6 Static Default Routing |
Unit 7 | Floating Static Routes |
Unit 8 | Configuring RIP version 2 |
Unit 9 | Configuring OSPF on Point-to-Point Networks |
Unit 10 | Configuring OSPF on Broadcast Networks |
Unit 11 | Manually Configuring the OSPF Router ID |
Unit 12 | Manually Configuring the OSPF Passive Interface |
Unit 13 | Debugging OSPF Adjacencies |
Unit 14 | Configuring OSPF on Non-Broadcast Networks |
Unit 15 | Configuring OSPF Point-to-Multipoint Networks |
Unit 16 | Configuring Basic EIGRP Routing |
Unit 17 | Configuring EIGRP Routing Using Wildcard Masks |
Unit 18 | EIGRP Automatic Summarization |
Unit 19 | Passive Interfaces for EIGRP Updates |
Unit 20 | Summarizing Routes with EIGRP |
Unit 21 | Verifying the EIGRP Database |
Unit 22 | Configure HSRP Redundancy |
Unit 23 | Configure GLBP Redundancy |
Unit 24 | Configure VRRP Redundancy |
Module 4 | IP Services |
Unit 1 | Configuring Static Network Address Translation |
Unit 2 | Configuring Dynamic Network Address Translation |
Unit 3 | Configuring Interface-based Port Address Translation |
Unit 4 | Configuring Pool-based Port Address Translation |
Unit 5 | Configuring IOS DHCP Server |
Unit 6 | Troubleshoot Client- and Router-based DHCP Connectivity Issues |
Unit 7 | DHCP Relay |
Unit 8 | Configuring Router as an NTP Client |
Unit 9 | Configure SNMPv3 |
Unit 10 | Configure SNMPv2 |
Unit 11 | Configuring IOS Device Logging to a SYSLOG server |
Unit 12 | Configuring QoS - Classification |
Unit 13 | Configure SSH Access / Disable Telnet Access |
Unit 14 | Perform an IOS Upgrade |
Unit 15 | Cisco IOS Upgrade - FTP |
Module 5 | Security Fundamentals |
Unit 1 | Configuring Passwords on Catalyst Switches |
Unit 2 | Permitting Telnet access to Catalyst Switches |
Unit 3 | Permitting Telnet access to Catalyst IOS switches – Login Local |
Unit 4 | Permitting Console Access to Catalyst IOS Switches |
Unit 5 | Configuring Enable Secret Password and Exec Timeout on Catalyst Switches |
Unit 6 | Configuring User Privileges on IOS Devices |
Unit 7 | Configuring Command and Password Privilege Levels on Devices |
Unit 8 | Configuring MOTD Banners |
Unit 9 | Changing the Configuration Register on IOS devices |
Unit 10 | Configuring and Applying Standard Numbered ACLs |
Unit 11 | Configuring and Applying Standard Named ACLs |
Unit 12 | Configuring and Applying Extended Numbered ACLs Inbound |
Unit 13 | Configuring and Applying Extended Named ACLs Inbound |
Unit 14 | Configuring and Applying Extended Numbered ACLs |
Unit 15 | Restricting Inbound Telnet Access using Extended ACLs |
Unit 16 | Debugging Network Traffic Using Extended ACLs |
Unit 17 | ACL Sequence Numbers |
Unit 18 | Logging ACL Matches |
Unit 19 | Securing VTP Domains |
Unit 20 | Configuring Switch Access Port Security |
Unit 21 | Configuring Advanced Static Switch Access Port Security |
Unit 22 | Configuring Advanced Static Switch Access Port Security |
Unit 23 | Disabling Auto-negotiation of Trunking |
Unit 24 | 802.1x |
Unit 25 | DHCP snooping |
Unit 26 | WPA2 PSK using the GUI |
Unit 27 | TACACS+ |
Unit 28 | RADIUS |
Module 6 | Practice Exams |
Unit 1 | Exam 1 |
Unit 2 | Exam 2 |
Unit 3 | Exam 3 |
Unit 4 | Exam 4 |
Module 7 | Bonus Labs |
Unit 1 | Password Recovery and Configuration Register |
