101 Labs – Cisco CCNA

Cisco CCNA is the gold standard of networking exams. CCNA-qualified engineers can plan, install and troubleshoot small to medium-sized networks for companies. Around 50% of your exam score will be based on your hands-on configuration and troubleshooting skills.

This course has been completely revised and updated for the brand new CCNA exam:

  • 200-301 CCNA – Implementing and Administering Cisco Solutions

We take you by the hand and guide you through the entire CCNA syllabus. Included in 101 Labs – Cisco CCNA are more than $400 worth of practice exams, advanced multi-technology labs, real-world and exam tricks and tips and to guarantee your success come exam day.

Cisco CCNA labs are the only way to learn important IOS commands, configuration steps, troubleshooting and debugs. In the exam you will be grilled on concepts such as NAT, access lists, passwords, routing tables, VLANs, spanning tree and much more.

Our experts take you by the hand and show you how to configure everything you need to know to pass the exam and make a success of your career as a Cisco engineer. Learn all the real world tips and tricks the experts use to quickly and accurately configure Cisco routers and switches.

Every lab comes with a solution as well as configurations so you can see how we solve the challenge. By the end of the course you will have configured more services and protocols than most Cisco engineers do in five years.

This course is 100% hands-on lab training. If you want to study the theory then please visit the Cisco CCNA training course on our sister website.

The course ends with 200 exam style questions which test your understanding of the topics. Take them over and over again until you are getting at least 95% consistently.

Take this course if you:

  • Have been studying for your CCNA for a while now but don’t feel ready
  • Find just reading a study guide not sufficient to understand the material
  • Can’t seem to nail subjects such as subnetting or access lists
  • Need CCNA labs to improve your knowledge and skill
  • Want an easy-to-follow study program that will get you results
  • Can’t find enough practice exams with solutions to prepare yourself
  • Want free 24/7 access to live Cisco equipment to practice on
Module 1 Network Fundamentals
Unit 1 Welcome to the Course
Unit 2 Configure, Verify and Troubleshoot IPv4 Addresses
Unit 3 Configure, Verify, and Troubleshoot IPv6 Addressing
Unit 4 IPv6 Address Autoconfiguration
Unit 5 ARP and Proxy ARP
Unit 6 Verifying Cisco HDLC Encapsulation
Unit 7 Configuring back-to-back Serial Connections
Unit 8 Configuring PPP Encapsulation
Unit 9 PPP Authentication using PAP
Unit 10 PPP Authentication using CHAP – Method 1
Unit 11 PPP Authentication using CHAP – Method 2
Unit 12 Configuring eBGP
Unit 13 Configure, Verify, and Troubleshoot GRE Tunnel Connectivity
Unit 14 PoE Basics
Unit 15 IP Parameters - Windows
Unit 16 IP Parameters - Linux
Unit 17 IP Parameters - MAC OS
Module 2 Network Access
Unit 1 Configuring Standard VLANs on Catalyst Switches
Unit 2 Configuring VTP Clients and Servers on Catalyst Switches
Unit 3 Configuring VTP Transparent Mode
Unit 4 Configuring Extended VLANs on Catalyst Switches
Unit 5 Changing the Native VLAN and Shutting Unused Ports
Unit 6 Restricting VLANs on Trunks and Changing the VTP version
Unit 7 Verifying Spanning-Tree Port States on Catalyst Switches
Unit 8 Spanning-Tree Protocol Root Bridges Manually
Unit 9 Spanning-Tree Protocol Root Bridges Using the IOS Macro
Unit 10 Assigning Multiple Instances to a VLAN Simultaneously
Unit 11 Configuring Spanning-Tree Protocol for Access Ports (Portfast)
Unit 12 Enabling Rapid Per-VLAN Spanning Tree
Unit 13 Configure, Verify, and Troubleshoot (Layer 2/Layer 3) EtherChannel (Static/PAgP/LACP)
Unit 14 Setting Switch Ports to Dynamic
Unit 15 Configuring a Default Gateway for Routers and Switches
Unit 16 Cisco Discovery Protocol
Unit 17 LLDP
Unit 18 Err-disable Recovery
Unit 19 Configuring and Allowing Inter-VLAN Routing - Router Sub-Interfaces
Unit 20 Configuring and Allowing inter-VLAN Routing - SVI
Unit 21 Installing a Wireless Access Point
Unit 22 Installing a Wireless Lan Controller
Module 3 IP Connectivity
Unit 1 Configuring Static Routing via Interfaces
Unit 2 Configuring Static Routing via IP addresses
Unit 3 Configuring and Naming Static Routes
Unit 4 Configuring Default Static Routes
Unit 5 IPv6 Static Routing
Unit 6 IPv6 Static Default Routing
Unit 7 Floating Static Routes
Unit 8 Configuring RIP version 2
Unit 9 Configuring OSPF on Point-to-Point Networks
Unit 10 Configuring OSPF on Broadcast Networks
Unit 11 Manually Configuring the OSPF Router ID
Unit 12 Manually Configuring the OSPF Passive Interface
Unit 13 Debugging OSPF Adjacencies
Unit 14 Configuring OSPF on Non-Broadcast Networks
Unit 15 Configuring OSPF Point-to-Multipoint Networks
Unit 16 Configuring Basic EIGRP Routing
Unit 17 Configuring EIGRP Routing Using Wildcard Masks
Unit 18 EIGRP Automatic Summarization
Unit 19 Passive Interfaces for EIGRP Updates
Unit 20 Summarizing Routes with EIGRP
Unit 21 Verifying the EIGRP Database
Unit 22 Configure HSRP Redundancy
Unit 23 Configure GLBP Redundancy
Unit 24 Configure VRRP Redundancy
Module 4 IP Services
Unit 1 Configuring Static Network Address Translation
Unit 2 Configuring Dynamic Network Address Translation
Unit 3 Configuring Interface-based Port Address Translation
Unit 4 Configuring Pool-based Port Address Translation
Unit 5 Configuring IOS DHCP Server
Unit 6 Troubleshoot Client- and Router-based DHCP Connectivity Issues
Unit 7 DHCP Relay
Unit 8 Configuring Router as an NTP Client
Unit 9 Configure SNMPv3
Unit 10 Configure SNMPv2
Unit 11 Configuring IOS Device Logging to a SYSLOG server
Unit 12 Configuring QoS - Classification
Unit 13 Configure SSH Access / Disable Telnet Access
Unit 14 Perform an IOS Upgrade
Unit 15 Cisco IOS Upgrade - FTP
Module 5 Security Fundamentals
Unit 1 Configuring Passwords on Catalyst Switches
Unit 2 Permitting Telnet access to Catalyst Switches
Unit 3 Permitting Telnet access to Catalyst IOS switches – Login Local
Unit 4 Permitting Console Access to Catalyst IOS Switches
Unit 5 Configuring Enable Secret Password and Exec Timeout on Catalyst Switches
Unit 6 Configuring User Privileges on IOS Devices
Unit 7 Configuring Command and Password Privilege Levels on Devices
Unit 8 Configuring MOTD Banners
Unit 9 Changing the Configuration Register on IOS devices
Unit 10 Configuring and Applying Standard Numbered ACLs
Unit 11 Configuring and Applying Standard Named ACLs
Unit 12 Configuring and Applying Extended Numbered ACLs Inbound
Unit 13 Configuring and Applying Extended Named ACLs Inbound
Unit 14 Configuring and Applying Extended Numbered ACLs
Unit 15 Restricting Inbound Telnet Access using Extended ACLs
Unit 16 Debugging Network Traffic Using Extended ACLs
Unit 17 ACL Sequence Numbers
Unit 18 Logging ACL Matches
Unit 19 Securing VTP Domains
Unit 20 Configuring Switch Access Port Security
Unit 21 Configuring Advanced Static Switch Access Port Security
Unit 22 Configuring Advanced Static Switch Access Port Security
Unit 23 Disabling Auto-negotiation of Trunking
Unit 24 802.1x
Unit 25 DHCP snooping
Unit 26 WPA2 PSK using the GUI
Unit 27 TACACS+
Unit 28 RADIUS
Module 6 Practice Exams
Unit 1 Exam 1
Unit 2 Exam 2
Unit 3 Exam 3
Unit 4 Exam 4
Module 7 Bonus Labs
Unit 1 Password Recovery and Configuration Register