101 Labs – Cisco CCNA

Cisco CCNA is the gold standard of networking exams. CCNA-qualified engineers can plan, install and troubleshoot small to medium-sized networks for companies. Around 50% of your exam score will be based on your hands-on configuration and troubleshooting skills.

This course has been completely revised and updated for the brand new CCNA exam:

  • 200-301 CCNA – Implementing and Administering Cisco Solutions

We take you by the hand and guide you through the entire CCNA syllabus. Included in 101 Labs – Cisco CCNA are more than $400 worth of practice exams, advanced multi-technology labs, real-world and exam tricks and tips and to guarantee your success come exam day.

Cisco CCNA labs are the only way to learn important IOS commands, configuration steps, troubleshooting and debugs. In the exam you will be grilled on concepts such as NAT, access lists, passwords, routing tables, VLANs, spanning tree and much more.

Our experts take you by the hand and show you how to configure everything you need to know to pass the exam and make a success of your career as a Cisco engineer. Learn all the real world tips and tricks the experts use to quickly and accurately configure Cisco routers and switches.

Every lab comes with a solution as well as configurations so you can see how we solve the challenge. By the end of the course you will have configured more services and protocols than most Cisco engineers do in five years.

This course is 100% hands-on lab training. If you want to study the theory then please visit the Cisco CCNA training course on our sister website.

The course ends with 200 exam style questions which test your understanding of the topics. Take them over and over again until you are getting at least 95% consistently.

Take this course if you:

  • Have been studying for your CCNA for a while now but don’t feel ready
  • Find just reading a study guide not sufficient to understand the material
  • Can’t seem to nail subjects such as subnetting or access lists
  • Need CCNA labs to improve your knowledge and skill
  • Want an easy-to-follow study program that will get you results
  • Can’t find enough practice exams with solutions to prepare yourself
  • Want free 24/7 access to live Cisco equipment to practice on
Module 1 Network Fundamentals
Unit 1 Welcome to the Course  
Unit 2 Configure, Verify and Troubleshoot IPv4 Addresses  
Unit 3 Configure, Verify, and Troubleshoot IPv6 Addressing  
Unit 4 IPv6 Address Autoconfiguration  
Unit 5 ARP and Proxy ARP  
Unit 6 Verifying Cisco HDLC Encapsulation  
Unit 7 Configuring back-to-back Serial Connections  
Unit 8 Configuring PPP Encapsulation  
Unit 9 PPP Authentication using PAP  
Unit 10 PPP Authentication using CHAP – Method 1  
Unit 11 PPP Authentication using CHAP – Method 2  
Unit 12 Configuring eBGP  
Unit 13 Configure, Verify, and Troubleshoot GRE Tunnel Connectivity  
Unit 14 PoE Basics  
Unit 15 IP Parameters - Windows  
Unit 16 IP Parameters - Linux  
Unit 17 IP Parameters - MAC OS  
Module 2 Network Access
Unit 1 Configuring Standard VLANs on Catalyst Switches  
Unit 2 Configuring VTP Clients and Servers on Catalyst Switches  
Unit 3 Configuring VTP Transparent Mode  
Unit 4 Configuring Extended VLANs on Catalyst Switches  
Unit 5 Changing the Native VLAN and Shutting Unused Ports  
Unit 6 Restricting VLANs on Trunks and Changing the VTP version  
Unit 7 Verifying Spanning-Tree Port States on Catalyst Switches  
Unit 8 Spanning-Tree Protocol Root Bridges Manually  
Unit 9 Spanning-Tree Protocol Root Bridges Using the IOS Macro  
Unit 10 Assigning Multiple Instances to a VLAN Simultaneously  
Unit 11 Configuring Spanning-Tree Protocol for Access Ports (Portfast)  
Unit 12 Enabling Rapid Per-VLAN Spanning Tree  
Unit 13 Configure, Verify, and Troubleshoot (Layer 2/Layer 3) EtherChannel (Static/PAgP/LACP)  
Unit 14 Setting Switch Ports to Dynamic  
Unit 15 Configuring a Default Gateway for Routers and Switches  
Unit 16 Cisco Discovery Protocol  
Unit 17 LLDP  
Unit 18 Err-disable Recovery  
Unit 19 Configuring and Allowing Inter-VLAN Routing - Router Sub-Interfaces  
Unit 20 Configuring and Allowing inter-VLAN Routing - SVI  
Unit 21 Installing a Wireless Access Point  
Unit 22 Installing a Wireless Lan Controller  
Module 3 IP Connectivity
Unit 1 Configuring Static Routing via Interfaces  
Unit 2 Configuring Static Routing via IP addresses  
Unit 3 Configuring and Naming Static Routes  
Unit 4 Configuring Default Static Routes  
Unit 5 IPv6 Static Routing  
Unit 6 IPv6 Static Default Routing  
Unit 7 Floating Static Routes  
Unit 8 Configuring RIP version 2  
Unit 9 Configuring OSPF on Point-to-Point Networks  
Unit 10 Configuring OSPF on Broadcast Networks  
Unit 11 Manually Configuring the OSPF Router ID  
Unit 12 Manually Configuring the OSPF Passive Interface  
Unit 13 Debugging OSPF Adjacencies  
Unit 14 Configuring OSPF on Non-Broadcast Networks  
Unit 15 Configuring OSPF Point-to-Multipoint Networks  
Unit 16 Configuring Basic EIGRP Routing  
Unit 17 Configuring EIGRP Routing Using Wildcard Masks  
Unit 18 EIGRP Automatic Summarization  
Unit 19 Passive Interfaces for EIGRP Updates  
Unit 20 Summarizing Routes with EIGRP  
Unit 21 Verifying the EIGRP Database  
Unit 22 Configure HSRP Redundancy  
Unit 23 Configure GLBP Redundancy  
Unit 24 Configure VRRP Redundancy  
Module 4 IP Services
Unit 1 Configuring Static Network Address Translation  
Unit 2 Configuring Dynamic Network Address Translation  
Unit 3 Configuring Interface-based Port Address Translation  
Unit 4 Configuring Pool-based Port Address Translation  
Unit 5 Configuring IOS DHCP Server  
Unit 6 Troubleshoot Client- and Router-based DHCP Connectivity Issues  
Unit 7 DHCP Relay  
Unit 8 Configuring Router as an NTP Client  
Unit 9 Configure SNMPv3  
Unit 10 Configure SNMPv2  
Unit 11 Configuring IOS Device Logging to a SYSLOG server  
Unit 12 Configuring QoS - Classification  
Unit 13 Configure SSH Access / Disable Telnet Access  
Unit 14 Perform an IOS Upgrade  
Unit 15 Cisco IOS Upgrade - FTP  
Module 5 Security Fundamentals
Unit 1 Configuring Passwords on Catalyst Switches  
Unit 2 Permitting Telnet access to Catalyst Switches  
Unit 3 Permitting Telnet access to Catalyst IOS switches – Login Local  
Unit 4 Permitting Console Access to Catalyst IOS Switches  
Unit 5 Configuring Enable Secret Password and Exec Timeout on Catalyst Switches  
Unit 6 Configuring User Privileges on IOS Devices  
Unit 7 Configuring Command and Password Privilege Levels on Devices  
Unit 8 Configuring MOTD Banners  
Unit 9 Changing the Configuration Register on IOS devices  
Unit 10 Configuring and Applying Standard Numbered ACLs  
Unit 11 Configuring and Applying Standard Named ACLs  
Unit 12 Configuring and Applying Extended Numbered ACLs Inbound  
Unit 13 Configuring and Applying Extended Named ACLs Inbound  
Unit 14 Configuring and Applying Extended Numbered ACLs  
Unit 15 Restricting Inbound Telnet Access using Extended ACLs  
Unit 16 Debugging Network Traffic Using Extended ACLs  
Unit 17 ACL Sequence Numbers  
Unit 18 Logging ACL Matches  
Unit 19 Securing VTP Domains  
Unit 20 Configuring Switch Access Port Security  
Unit 21 Configuring Advanced Static Switch Access Port Security  
Unit 22 Configuring Advanced Static Switch Access Port Security  
Unit 23 Disabling Auto-negotiation of Trunking  
Unit 24 802.1x  
Unit 25 DHCP snooping  
Unit 26 WPA2 PSK using the GUI  
Unit 27 TACACS+  
Unit 28 RADIUS  
Module 6 Practice Exams
Unit 1 Exam 1  
Unit 2 Exam 2  
Unit 3 Exam 3  
Unit 4 Exam 4  
Module 7 Bonus Labs
Unit 1 Password Recovery and Configuration Register